Black EB XR6 (HYPOEB)

SnipeZ · Post by **SnipeZ** » May 14th, 2009, 8:28 pm

hehe. grinder

if your rims are real they would have a ford symbol on the inside of the rim. prob on a spoke

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » May 14th, 2009, 8:42 pm

SnipeZ wrote:hehe. grinder

if your rims are real they would have a ford symbol on the inside of the rim. prob on a spoke

well in that case no there not real.

they have a ford simble on the center cap of the wheel,i've never seen it befor.
everyone else with these wheels have a tickford simble on there center cap

SnipeZ · Post by **SnipeZ** » May 14th, 2009, 8:46 pm

center caps can be changed. just a m atter of getting the right ones to fit.

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » May 14th, 2009, 8:52 pm

yehh i no they can be changed,i've just never seen the ford ones on another car befor..

travs ea-xr6 · Post by **travs ea-xr6** » May 14th, 2009, 10:00 pm

ive noticed on genuine el gt,s the rims have the ford badge on the center caps
i dont like the tickford log on the caps

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » May 15th, 2009, 6:01 pm

hmm i've never seen them

travs ea-xr6 · Post by **travs ea-xr6** » May 15th, 2009, 10:30 pm

are your rims 8.5 inches wide or 8 inches wide

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » May 16th, 2009, 12:46 am

travs ea-xr6 wrote:are your rims 8.5 inches wide or 8 inches wide

8.5 front and back.

67rce · Post by **67rce** » May 16th, 2009, 1:33 am

if they are 8.5" they are genuine, replica's are only 8" wide

ORSMEB · Post by **ORSMEB** » May 16th, 2009, 1:11 pm

They look genuine to me. You can't fit the Ford centre cap in replica's because they are completely different sizes...anyway

Your cap looks nice mate. It reminds me of one I used to drive..

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » May 16th, 2009, 6:26 pm

well there ya go,looks like they mite be real?

yehh i member seeing your one on here once,but i looked for the thread the other day and couldnt find it.

looks good with the stockys on it aswel

ORSMEB · Post by **ORSMEB** » May 16th, 2009, 9:12 pm

cini wrote:...yehh i member seeing your one on here once,but i looked for the thread the other day and couldnt find it...

You'll find it under the Showroom section. It's called 'Steve's ORSMEB'

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » May 17th, 2009, 8:38 pm

how much did you end up selling it for?

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » May 19th, 2009, 8:47 pm

motor wont be getting for abit longer then i thought

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » May 20th, 2009, 6:11 pm

haha snipez about 30 seconds after you drove past i kicked the clutch and i think i blew my diff up

ill no wats going on in the morning wen its day light

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » May 21st, 2009, 2:41 pm

lol no it had nothin to do with the diff,i snap the end of the tail sharft off near the uni..half of it is stuck in the back of my gear box..

has anyone seen this befor?

After two hours of banging and tapping this wat it looked like...

SnipeZ · Post by **SnipeZ** » May 26th, 2009, 6:02 pm

ah ****. that sucks.

got it fixed yet?
was that coming out of center road or coming from logues?

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » May 26th, 2009, 6:22 pm

coming out of center road lol.

yehh went and got a new tailsharft then next day and changed the uni.
its all good now..

SnipeZ · Post by **SnipeZ** » May 26th, 2009, 6:31 pm

sweet. i was looking in my mirror and saw you pull over.
didnt know what you were doing.

when ya getting your new engine?

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » May 26th, 2009, 6:36 pm

yehh it wasnt to bad since i dont live to far away from where it happend.

i wont have the money for a little bit longer then i thought.
probley have the cash in about 4-5 weeks,buying a clutch this week or next week sometime then its just a matter of booking it...

SnipeZ · Post by **SnipeZ** » May 26th, 2009, 6:46 pm

yea. pretty lucky. im all the way on the other side of town now.

what clutch you gonna get?
good luck with it all mate.

my cars running like a dream. nothing wrong with it since i got it. cept a flat.

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » May 26th, 2009, 7:09 pm

probley a HD.

well thats alright then! has it got an 2.5 on it?

SnipeZ · Post by **SnipeZ** » May 27th, 2009, 9:44 pm

yea. sure is.
i fair dont like my exhaust tip. stupid oval thing...
my clutch is slipping a lil when i smash it into 2nd.
will prob book up an RPM HD through work when ive paid off my extracters.

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » May 28th, 2009, 6:20 am

thats alrite then.

how are you ding trying to find a boot lid?

SnipeZ · Post by **SnipeZ** » May 28th, 2009, 6:26 pm

crap. been looking but nothing has come up yet.
getting quite annoyed...

btw do you know any one who rolls guards?

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » May 28th, 2009, 7:07 pm

yehh thats got too suck.

naa,everyone i no has done theres there self or takin there car down to gattys.
im not to sure how much he charges to roll them,wouldnt be to much i recon.

SnipeZ · Post by **SnipeZ** » May 31st, 2009, 11:54 am

ah righto. when i have a load of people the tyres rub and the car isnt even lowered past xr height

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » May 31st, 2009, 12:25 pm

wow that sux!!

i was talkin to a guy a know and he got his rolled from gattys and said it was only like $50 or somthing like that.

SnipeZ · Post by **SnipeZ** » May 31st, 2009, 12:26 pm

Ah sweet as.
i will head up there tomorrow

just needa buy another set of ultras

StockEB · Post by **StockEB** » May 31st, 2009, 7:47 pm

Thats not an XR6 cylinder head. Has it been already replaced...?

Your car might be an S-pack. Does the engine code on the ID plate have an "X" If it does it is definately an XR6.
Just curious as your front end and boot garnish are from an ED XR6.

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » May 31st, 2009, 8:14 pm

StockEB wrote:Thats not an XR6 cylinder head. Has it been already replaced...?

Your car might be an S-pack. Does the engine code on the ID plate have an "X" If it does it is definately an XR6.
Just curious as your front end and boot garnish are from an ED XR6.

wen the guy got the motor done he put an ef head on it.
and wen i bought it the front end was smashed and thats why the front end is like that.
i didnt no about the garnish? do you meen coz it has an ed xr6 badge? coz if you do i put that on because i didnt like the xr6 sticker the eb xr6's have...
ill have a look 2moro if it has an X on the plate

StockEB · Post by **StockEB** » June 1st, 2009, 8:31 am

Silly me...! Thats an EF head. My eyes must be painted on to not see the 94...

EF head is better anyway mate, and the car looks mint.
Gotta love the black and you couldn't pick a better set of wheels for it.
Would look even better with leather seats to match the door trims...

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » June 1st, 2009, 12:40 pm

you feel silly? trust me i feel more silly then you,i didnt even my own car had an EF head on it untill someone on here told me lol.
well its good to no the EF head is alot betta.
well the plan is after the motors is to put some EL ghia door trims on and then try find leather seats.
probley wont happen for a while since theres not alot of parts down here..everything i get is off eaby realy and every now and then somthing will pop up at the weackers...

SnipeZ · Post by **SnipeZ** » June 2nd, 2009, 5:50 pm

gatts said 45 a side for guards getting rolled.
thanks for that

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » June 2nd, 2009, 6:54 pm

thats not too bad.

betta then fucking ya tyers all the time.

yehh no worries mate.

SnipeZ · Post by **SnipeZ** » June 9th, 2009, 6:15 pm

haha. he quoted me 45 a side by mistake.
i still payed 90 for them but he told me it should have been 45 a corner

got smoked tail lights, side repeaters, new black wheels and is getting lowered on ultras this weekend

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » June 9th, 2009, 6:20 pm

been busy! Will Look Good As Once The New Springs Go In!!

Just Picked Up A Set Of EL Mirrors For A Good Price Off A Mate. Thanx For The Offer Anyway Snipez.

And 4 EL Door Handles Will Be At My House With In The Next Day Or Two. Then Off To Get Painted.

SnipeZ · Post by **SnipeZ** » June 9th, 2009, 6:21 pm

no worries.
hope they work out for ya

Michael (HYPOEB) · Post by **Michael (HYPOEB)** » June 9th, 2009, 6:23 pm

got any pics of wat ya car looks like now?

SnipeZ · Post by **SnipeZ** » June 9th, 2009, 6:28 pm