Supercharged 1960 XK

[XKNO1]

Gday guys,
Well its 50 years of Falcon in Aus and i thought i better get the old girl on the road. Just a few more bits and pieces and its down to the dyno.
Heres some pics.







Its a pre-crossflow(log motor) with a Classic Inlines alloy head,Yellow Terror roller rockers,EF crank,200 rods,4.6L forged stroker pistons,gear drive,crow cam,DUI dissy,msd ignition,Barry Grant Mighty Demon 595 Blow through carb,Eaton M90 with Bypass valve through water to air intercooler with blow off valve.Driving through a 2500 stall in a full manual C4.

[WRL090]

nice that look farken awsome keep up the good work, did it produce good figures on the dyno????

[Bipolar]

Sweet! Bay is horn.

It'd make for interesting driving without that brace.

[LTDHO]

Othar than paint and wheels it's stock looking from the outside.

On stockies, it would be the perfect sleeper!

[Michael (HYPOEB)]

Thats a sweet ride you got there mate. Never new a EF crank fitted these motors!
It looks as hes made is own brace so i wouldnt think it would be to bad of a drive.

[EF ECTIV]

love the first gen fords... they weigh **** all, and look perfect from the factory...

[Dezza]

That looks awesome! The XKs just look so sleek. Love it

[Rollin]

Bloody hell!

[LUXO_8]

looks fantastic, would love to hear how it sounds!!
awesome car

[LOW_XR]

awesome! love these old falcons.

[DEVLXR]

Thats mad.

[huggiebear]

thats awesome!!! good work

EF cranks fit in pre crossflows?

[xr6berto]

+1 for doing somthing different

[XKNO1]

thats awesome!!! good work

EF cranks fit in pre crossflows?

Yes it does. I was looking at useing the balancer of the EF as its serpintine like blower pulley then i looked at the crank and you just need to machine block to take EF seal.



Everything lines up and all the bearing are the same and everything !!
Then on with the 200 rods and forged pistons for a better rod /stroke ratio and it should see 6000rpm easy



Thanks for the compliments, it makes all the time and efort worthwhile.

[vegabass]

So the falcon engine has changed about 1% over 50 years? (excluding BA onwards)

Id own that.

[XKNO1]

Gday Guys, Its a happy day i managed to fire her up for the first time, heres a little vid.
http://s185.photobucket.com/albums/x180 ... V01487.mp4" onclick="window.open(this.href);return false;
It fired strait away once i turned the fuel pump around the right way .Still got some wiring and tuning before i head to dyno so ill keep you posted.

[huggiebear]

thats sounds TOUGH AS!!!!!! absolutely awesome. well done

[TUFED6]

Awesome car. Can you tell us a bit more about the cylinder head? And who made your pistons?

[XKNO1]

Awesome car. Can you tell us a bit more about the cylinder head? And who made your pistons?

Gday TUFED6, The Head is from a company in the US called Classic Inlines.(check them out at classic inlines .com) Its like the 2V head that was in some of the XY to XA,s (The US didnt go Cross-Flow like here in OZ so were stuck with the old Log Head right up till the 80's and would pay good money for a 2V.)but the chambers are tweaked and ive got bigger valves with a port and polish etc.The pistons are forged Keith Black to suit a Rover 4.9 stroker kit (the number on piston is DW49952). It worked out to have a comp ratio with a 46 thou bore and the 200 rods and 56cc head combustion chamber at 8.5-1.

[XKNO1]

Ive hooked up the exaust and msd unit and tuned it the best i can so now i just have to save and get it on the dyno. Sounds a bit diferent with exaust on.
http://s185.photobucket.com/albums/x180 ... V01489.mp4" onclick="window.open(this.href);return false;

[huggiebear]

thats awesome. i love you work!!!

[sfrrob]

That is AWESOME!
I love the sound of that.......... I'd be wrapped to have my EA sound half as tough as that!!

[sfrrob]

That is AWESOME!
I love the sound of that.......... I'd be wrapped to have my EA sound half as tough as that!!

[gradner]

hey mate , i have been searching around on boosted falc for any info about water to air intercoolers ....is yours a cheap or and expensive one? do u find it affective ? i would just like an experienced opinion before i hand over cash . love your car btw , nice find with the later crank .

[YBHVE4]

[XKNO1]

Its finally running.http://www.youtube.com/watch?v=PJUrQRzQeF4" onclick="window.open(this.href);return false; http://www.youtube.com/watch?v=8iO7Oaqmr8s.When" onclick="window.open(this.href);return false; shes run in ill give her a few revs.

[Fat Rat]

F*#KING nice XK! good work mate! not often u see something like that under the hood!

[sikwags_218]

That is so fricken cool mate. I love it some thing different and it sounds sweet. Such a sleeper lol

[XKNO1]

Well moneys been the hold up but i finaly got her over to the dyno.She had a few problems,one-feul was erratic and she would go leen(turns out when i sealed the feul tank i blocked the breether i counldnt figure it out the guys at Mopower dyno got it in minutes).two- I thought i needed to adjust tappets as she had a little rattle.it turns out i had a dodgey lifter so the heads of and im getting a MLS gasket made while its off(its $600.00)but probable good insurance.and three-the bypass valve wasnt working properly. The guys at the dyno say it was quite erratic and when it starts to go into boost it would open and dump it so im trying some others.They havent got a figure with the blower hooked up as yet but they got 158hp at the wheels with out it blowing through. and they havent done any tunning yet. not bad for a old 2v with 8.5to1 comp when you consider they came out with 175hp at the flywheel.Im shooting for the 300 to 350hp range so ill let you know

[EBOOST]

looks dam good mate.

hopefully once ur issues are sorted it pulls what u want.
cheers josh.

[AdamF]

that is a mint car

[XKNO1]

Here's a little video of her before she went to dyno.http://youtu.be/PJUrQRzQeF4" onclick="window.open(this.href);return false;

[Bipolar]

Sounds great. Bet you'd get a few WTF looks from people haha.

[XKNO1]

Got her from the dyno 7psi non intercooled-
Intercooler needs water tank an it wasnt making any differance to air temp.Carb is a bitch to tune so Ill save and get one of these http://www.professional-products.com/EFI_3.php" onclick="window.open(this.href);return false;
then up the boost.
Gave her a little squirt
gonna have some fun

[DJV8T5]

That is freaking awesome...sweet XK